BMW OPS DIS V57.0+SSS V32.0
OPS is intended for diagnosis and rapid programming of control units.
When operated at the SSS, no diagnostic or technical measuring procedures are possible, as no measuring technology is incorporated; in this instance, OPS is used predominantly for programming control units (flashing). Communication with the vehicle can be performed both via the MOST and via the OBD2 interface. The OBD2 interface is required for the power supply to the OPS and has communication properties via which the vehicle can be identified and the data to be programmed can be determined. From CIP version 7.0, it is possible to delete fault code memories via OPS.
OPS has been designed for encoding, individualising and programming (CIP) via the Software Service Station (SSS) and envisaged for use as part of the BMW diagnostic system (DIS) from DISPlus and Group Tester One (GT1). It is intended for testing and programming tasks from the E65 series, taking the place of the diagnostic head.
package list :
1-OPS multiplexer head,
2-16 pin OBD-II cable,
3-LAN cable ,
4-Most Cable (Fiber Cable),
5-DIS Software V55 & sss v2.8 for IBM T30 laptop
OPS with DIS for diagnosis Supported Models:
Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E38, E39, E46, E52, E53, R56, R50, R52, R53
OPS with SSS for programming Supported Models:
(1) Vehicle interface via OBD-II socket:
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, R56, R50, R52, R53
(2) MOST compatibility ( multi channel programming):
E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, R56, R50, R52, R53
Keywords: BMW OPS DIS V57.0+SSS V32.0, bmw ops, bmw programming tool, bmw diagnosis, bmw diagnostic scanner, BMW OPS+DIS+SSS